I have the 2.3 pulley, Calmini cat-back and boost gauge. I have been getting 9-10 PSI around 5500rpm. I tried the bypass mod and the boost dropped to 7-9psi. Anybody know what I need to get it up to 11 or 12psi? Do I need to reset the computer again?

Nice, pretty much the same setup as mine. .I think u cut the wrong hoses. Did you look at Ag Bullet's pics:

http://www.picturetrail.com/gallery/view?p=999&gid=926649&uid=135343

I'm getting 11.5 psi boost with my 5 speed.

Where did you mount ur Gauge and cup? You have pics. Email or IM me. You're in AZ? Look at my profile. Let me know how it goes...?

As best as I can tell from the pics I did it right. I took the short hose off the top of the blower where it attaches to the top of bypass diaphram. I pluged where it comes out of the blower. I ran a hose from the top of the diaphram to the hose that used to attach to the bypass solenoid, which goes to the intake below the blower. I capped where the hose came out of the solenoid. I sthis correct?

I emailed u the plumbing schematic to hullrj@hotmail.com

Let me know if that's what you did.