there are two ruber gromets one on each side of the truck on the back side of each quarter panelthis is where the ends of the harness go through to the tail light assembly .you must first remove the trim plate on the back of the cargo area then remove the buttons and screws holding the bottom halfs of the cargo area walls on the buttons (one each side)are located on the top of the bottomhalf next to the tail gate. the screws (one each side) are located in the mounts for tha cargo shade. next pull the bottom halfs out and access the back side of the gromet and tail lights.any? e-mail me

------------------
Kevin
00' Super Black SE 5 speed
31" BFG M/T's, ARB, Rancho RSX's
superblackxterra.tripod.com