Originally posted by Bobby:
...What would you say the difficulty is in applying this epoxy to the truck parts?...
The procedure was simple, but aduous. It's the preparation, preparation, and more preparation that made it difficult.
The coating was easy and was done in short order and we applied three coats.
The preparation is not something I wish to repeat.
1) Wash off the dust, dirt, sand, & mud,
2) Remove trim,
3) Tape body panels,
4) Sand body panels,
5) Clean body panels with Xylene (Goof Off),
6) Sand trim,
7) Clean trim with Xylene,
8) Ready to coat
The preparation took about five hours, the coating took less than one (we applied three coats and it needed 15 minutes between each).
Previous Topic
Index
