I know visually it doesn't look like I've done much since the last update, but I got the u-joints and driveshaft back in, made u-bolt plates, new extended brake line in, bled the brakes, and put the thing back together. Just need figure out the shock mounting thing. There's two tabs already there, but I'm gonna have some long-a$$ shocks if I use those (which could be a good thing - articulation won't be limited as much).

Then it's on to the front...that's gonna be harder. Need to shorten the drag link, and mate it to the pitman arm... I won't be doing that work.

EDIT: So I needed to turn the turd around so I can work on the front.... Took it around the block with the ass end sky-high. Looked pretty funny (and got a couple looks from the neighbors), but nothing blew up at 25mph for a couple minutes - so far so good. Now the front is up on jack stands and I'll starting ripping it apart after xmas.

Done (w/ ugly exhaust - need to put the bumper on too...):


Side view: (30's will be replaced with 33" MTRs here soon too):


EDIT #2 - Mockup w/ 33's.


EDIT #3 - Actually got it OUTSIDE for once. (Holy cripes, it's ugly...)