I've got new Skid Row frame stiffeners and a new receiver hitch and the two won't work together. The stiffeners don't align to the bottom of the frame tube. There is a gap under the stiffeners that gets larger when going deeper into the frame. The frame has a curve to it so it's not a matter of drilling new holes for teh bolts. I can make spacers but the top of the stiffener and the bottom of the frame will not be parallel. This would cause the heads of the hitch bolds to bend over when things are tightened.

I will have to take out the stiffeners or do a lot of metal work to get these to work with the hitch.

Dave