Quote:
Originally posted by PHXX:
Quote:
Originally posted by datz510:
[b]
Take the idler to any competent machine shop and have them mill the inner radius out 1/16" to a depth of 3/4" (or deeper.. mill as needed to allow a nice fit into the Calmini idler arm mount) top and bottom to fit two spherical bearings.

Have them cut down the original sleeve to fit between the two bearings so there will be no static side loading on the spherical joints once its all tightened up. Reinstall, Torque the bolt down. Grease it up and go wheeling..
I'm really interested in finally doing this mod. I know someone with a Lathe that would help me out, but i'm not exactly sure what i'm supposed to tell him that i want done. Soo...could someone put this in layman's terms??

Are you enlarging the Diameter of the Bushing hole... or just making it deeper?

And as for the whole second part.. i am just confused.[/b]
BUMP....Axle or Alpine? Could either of you help me out here?
confused

Thanks in advance. [Wave]