Originally posted by rednec:
We just got done installing a suspension lift on RedX's truck and we're having a little problem getting the camber straight. It the 3" AC sus. lift. The tops of the front tires are noticeably sticking out. We've adjusted the camber bolts as much as possilbe and its better but still not close enough. The only other thing I can think of is that we are going to need a new camber bolt kit. Anybody have any ideas on this? Thanx.......
This should help; on the driver side adjust the camber bolts so that the center mark points to about 1:00-2:30pm, on the passenger side they will be set to about 9:30-11pm then a 1/4 turn at a time adjust the tie rods...roll the truck back and forth a few feet and check everything again. This should get you close, if you have a problem e-mail Nissan Mike(4x4parts@shadow.net) or give him a call. Let us know how this works.
_________________________
FSRBIKER
97 TJ, 2" lift, 32's
69 Bronco, locked Dana 44, 35" MTR's, 5.5" lift
EOE...Opening Soon!
Previous Topic
Index
