So I have seen the "How To" section from two sites that show torsion bar adjustment. Both have pictures and looks easy.

I get underneath the X driver side, ok, everything looks easy. Go to the passenger side, very different from the photos on the sites I've seen. First, in front of the adjuster nut is a metal upside down "Y" that blocks access to the nut. Now I can try it from the back, but there is very little room to turn the wrench because the exhaust pipe is real close. No room to get a good crank.

I again went to the 2 sites that always get posted for this, and the photos show a clear shot to the adjuster nut. Nothing in the way.

Any 02 or 03 guys that raised the front of your X, did you have a hard time getting a wrench in on the passenger side?