I would be curious to know about those that Tbar raised, what "frame height" they are currently.

I can't post a picture, but before tweaking, I measured from the bottom of the frame right in the area of where the front clip of the step rail is. Where the frame starts to turn a little inside.

From the bottom of the frame driver side was just under 14", passenger was just over 13". I cranked it a few turns to even out.

Today I got the X back from a shop that installed the Calmini AALs and he went as far as to tweak them again to get rid of the rake.

When I first saw the X, I thought "Damn its sitting high" and when I got in I was kind of worried he raised the Tbars too much. I got home and measured both sides. They are just about 15" on both sides. So he only took them up 1 inch.

Truck drove a little more bumpy but it drove straight, no pulling.