Richard,
The problem is the max pressure is 105. If you run a Quik Air 2 in that short a range, it will be running almost constantly. The range needs to be expanded to limit how often the compressor comes on. At a range of only 15 psi, it will start running as soon as I engage the lockers. If I allow it to drop below the 90 psi level, say 80 - 105, the spring pressure in the lockers will overcome the air pressure and either disengage at an inopportune moment or cause damage to the lockers. Add to that the extra time needed to pump the tank back up and it could create a problem. The QA2 would be perfect if I didn't plan on running a tank. Although I don't know how well it would hold up under a 100% duty cycle.
Originally posted by Richard Krenn:
I just got this from SunPerformance.com
It looks like you can fill up a 5 gallon tank in 4 minutes with a QA2
code:
FLOW RATE - 2.18 CFM
MAXIMUM PRESSURE - 105 P.S.I.
DUTY CYCLE : 40 MINUTES @ 40 P.S.I.
TIRE RIM VOLUME TIME
31X 10.50 15 X 7 17.9 gal.
0-30 psi 3:15
15-30 psi 1:28
30-60 psi 3:40
33 X 12.50 15 X 8 23.8 gal.
0-30 psi 4:39
15-30 psi 2:18
30-60 psi 5:20
35 X 12.50 15 x 10 33.3 gal.
0-30 psi 6:00
15-30 psi 3:00
30-60 psi 7:05
TANK 5 gal.
0-30 psi 0:48
60 psi 2:02
80 psi 3:01
100 psi 4:13
------------------
Gordon "The Warmonger" White
Silver Ice SE 4X4
Previous Topic
Index
